AEG KVH 32 Guía de usuario Pagina 57

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 61
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 56
5-3
Maintenance
54-0157 Rev. J
5.4 Reshipping the Antenna
If you need to repack the antenna unit for shipment, the shipping
restraints removed during installation must be reinstalled. Follow
these steps to reinstall the restraints.
1. Remove the radome.
2. Rotate the antenna unit so that the LNB is facing
away from the baseplate connectors.
3. Attach the three restraints to the baseplate using
the
1
4"-20 x
5
8" hex screws and washers (provided in
the kitpack) and nuts (removed from the restraints
during installation) as pictured in Figure 5-1.
Figure 5-1
Attaching the Shipping Restraints to the Antenna
Baseplate
4. Place the antenna bracket on the forward shipping
restraint.
When rotating the azimuth
mechanism by hand, go slowly!
Hitting the mechanical stops with
excessive force will damage the
azimuth limit switch.
Vista de pagina 56
1 2 ... 52 53 54 55 56 57 58 59 60 61

Comentarios a estos manuales

Sin comentarios