AEG KVH 32 Guía de usuario descargar pdf (Pagina 18)

2-7

Installation

54-0157 Rev. J

12. Cut the tie-wraps holding the antenna unit to the

forward shipping restraint (see Figure 2-7).

Figure 2-7

Forward Shipping Restraint

13. Remove the nuts and washers securing the

shipping restraints to the baseplate (see

Figure 2-8).

Figure 2-8

TracVision R5/R4 Shipping Restraints (Top View)

14. Remove the shipping restraints and replace the

nuts and washers into their original positions. All

nuts and washers removed in Step 13 must be

reinstalled. These nuts and washers secure the

baseplate to the mounting plates.

15. Place the radome onto the baseplate (labels facing

the sides of the vehicle) and secure in place using

the eight pan head screws and flat washers

removed in Step 10.

16. Drill the cable access hole (marked in Step 4) in the

vehicle’s roof.

Rotating Plate

Shipping Restraint

Rotating Plate

Shipping Restraint

Forward Shipping

Restraint for

LNB Bracket

Save the shipping restraints,

washers, and nuts in case the

antenna unit needs to be removed

and shipped to another location.

Four

⁄4˝ x

⁄8˝ hex head screws have

been provided in the kitpack for

shipping as the bolts used to hold

the shipping restraints during initial

shipping are integral parts of the

mounting plates.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 60 61

Sin comentarios

AEG KVH 32 Guía de usuario Pagina 18