AEG HG975550VB Manual de usuario descargar pdf (Pagina 13)

50 mm

400 mm

If a furniture unit is

installed at a distance of

400 mm above the hob,

there must be a

minimum safety distance

of 50 mm to the left or

right from the edge of

the hob.

5.

6.

7.

B

A

A. supplied seal

B.

supplied brackets

8.

CAUTION!

Install the appliance only on

a worktop with flat surface.

4.8 Possibilities for insertion

The panel installed below the hob must

be easy to remove and let an easy access

in case a technical assistance

intervention is necessary.

Kitchen unit with oven

The electrical connection of the hob and

the oven must be installed separately for

safety reasons and to let easy remove

oven from the unit.

4.9 Testing appliance

operation

WARNING!

Servicing must only be

carried out by an authorised

service person.

After installation, test the appliance and

check if it operates correctly.

1. Turn on the gas and electricity

supply, and attempt ignition on all

burners, separately and in

combination. It takes additional time

to light the gas for the first time. Air

is purged from the pipes.

2. Observe the flame appearance on

each burner. Check the injector size

and supply pressure require if the

flame is much larger or much smaller

than expected. If you can not solve

the problem, contact the After Sales

Service.

3. Check the turndown (minimum or

low) setting on each burner, it may

need adjustment. Valves have a

bypass controlling screw, which you

can accessed by removing the knob.

ENGLISH

13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Comentarios a estos manuales

Sin comentarios