
45
Metal décor strips
1 Warning! Do not use vinegar, lemon juice or lime slaking agents on the
cooking surface's décor strips, otherwise dull spots will result.
When cleaning do not introduce flat objects (e.g. knives) under the dé-
cor strips, as otherwise these can possibly become detached.
1.Wipe metal décor strips with a damp cloth and a little washing up liq-
uid.
2.Soak dried on spillages with a wet cloth. Afterwards wipe off and rub
dry.
What to do if …
Problem Possible cause Remedy
The cooking zones will not
switch on or are not func-
tioning
More than 10 seconds have
passed since the appliance
was switched on
Switch the appliance on
again.
The child safety device is
switched on
l
Deactivate the child safety
device (See the section
“Child safety device”)
Several sensor fields were
touched at the same time
Only touch one sensor field
The sensor fields are partly
covered by a damp cloth or
with liquid
Remove the cloth or the
liquid.
Switch the appliance on
again.
Safety cut-out has been
triggered
Switch the appliance on
again
The lock is switched on l Switch off the lock (See
the section “Locking/un-
locking the control panel”)
The residual heat indicator
is not displaying anything
The cooking zone was only
on for a short time and is
therefore not hot
If the cooking zone is sup-
posed to be hot, call the
Customer Service Depart-
ment.
Comentarios a estos manuales