AEG 6110M-MNAB3 Manual de usuario descargar pdf (Pagina 17)

Installation Instructions

Notes for Switzerland

Contrary to the Household Installation Regulations of the SEV, section

47330.1, the built-in ovens, hobs and cooking surfaces may be installed

in flammable materials.

Parts that project into the space underneath the hob must be made on

non-flammable materials, or be at least 100 mm from the bottom edge

of the hot plates. Flammable walls and ceilings above the cooking sur-

faces be fitted with fire retardant material in accordance with the reg-

ulations of the fire department in the respective Kanton.

The second rating plate included with the hobs and cooking surfaces

must be fitted in a location near the appliance so that it is clearly visi-

ble if required, but hidden out of sight (dust and grease free surface).

Electrical connection

• Connect the wiring harness plugs with the respective sockets of the

same colour of the built-in oven or switch box.

• Following connection to the mains supply, all cooking zones are to be

switched on, at the maximum setting, one after the other for approx.

30 seconds to check that they function correctly.

The indicator for the multi-ring switching flashes when the appliance is

wrongly connected. The cooker/switch box is connected to 400V. Have

the cooker or switch box connected to 230V by a qualified electrician

according to the connection diagram (see Instructions for Installing the

Cooker or Switch Box).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

Sin comentarios

AEG 6110M-MNAB3 Manual de usuario Pagina 17