AEG 6530DG-M Manual de usuario

1INSTRUCTION- ANDINSTALLATION BOOK6530 DG-m HRV /GB 949600250GB

10Maintenance and cleaning For reasons of hygiene and safety, the cooking zones must be kept clean. Grease stai

11Stainless steel surfacesPerform daily cleaning with a slightly damp cloth. For more severe soiling, use a liquid cream. Always clean the steel in

12The operating panel with knob, pan support and burner covers/rings are to be cleaned with ordinary cleaning agents.Do not use any kind of scouring p

13Caution: In order to avoid a hazard this appliance must be installed according to these instructions for installationThe hob unit can be mounted in

14It is not necessary to attach the reinforcement beam to the table surface, as it is held in place by a specially designed moulding, which is incorpo

15Do not install the hob above drawers.

16The unit´s externally measured length145 mm:Cooker hood290 mm:Two-zone ceramic-top electric hobTwo-burner gas hobGrillFryerWok580 mm:Four-zone ceram

17Gas installationIn accordance with local requirements for domestic gas cooking appliances.Gas installation must only be carried out by an authorised

18N L1240 V1N + PEHO5V2V2-FYellow/Green: 61 mm +/- 3 mmBlue and brown: 51 mm +/- 3 mmType of gasAdjusted to natural gas:G20 - 20 mbar - G25 - 25

19ServiceQuestion:There is no spark when lighting the gas?When the operating knob is released the gas ring goes out again?The gas ring burns very unev

2Congratulations from AEGDear Customer,Congratulations with your new Hob.It is important that you become familiar with the functions and features of t

20325 88-3850 Rev. 3-021

3Contents Page noFor the userYour new aplliance ... 2Safety inform

4Safety informationThese warnings are provided in the interests of your safety. Ensure you fully understand them before installing or using the applia

5The primary air intake apertureMust never be accidentally blocked by objects of any kind.

6Description of the productBurnerControl knobAir intake

7Burner markingsSymbols at each control knob indicates which burner is adjusted with the control knob.Front BurnerBack burnerPanel markingsEach contro

8Together with the burner ring the burner ring/cover forms a space where the final mixture of gas and air takes place in order to make the gas burn co

91. Depress and turn the control knob for the burner to the left to max. flame . (Ignition position)2. The ignition electrode will emit