AEG KVH 32 Guía de instalación descargar pdf (Pagina 23)

At the customer’s option, you can connect a

NMEA device to the TV-Hub, allowing the

antenna to use its GNSS position and heading

data to speed up satellite acquisition. The current

position and heading will also be displayed on

the Home page of the web interface.

Follow these steps to connect a NMEA device to

the TV-Hub, if desired.

NMEA 0183

a. Wire and connect the 2-position terminal

strip connector (supplied in the kit) as shown

in Figure 35.

b. Configure the NMEA device to transmit one

or more of the supported NMEA 0183

messages at 4800 baud (see Figure 36).

NMEA 2000

a. Connect the TV-Hub to the vessel‘s

NMEA 2000 CAN network backbone via a

“T” connector, as shown in Figure 35. Be sure

to use a standard drop cable: 5-wire

(4 conductors + shield) twisted pair with

micro-C connectors.

b. Configure the NMEA device to transmit one

or more of the supported NMEA 2000

messages (see Figure 37).

Later, you will select the NMEA source at the

TracVision Setup Wizard (see “Setup Wizard” on

page 30).

TV-Hub

B A

1 2

NMEA 0183 Talker

NMEA

0183

NMEA 2000 Talker

CAN Network

Backbone

NMEA

2000

Figure 35: TV-Hub NMEA Connections

Figure 36: Supported NMEA 0183 Messages

NMEA 0183 $--xxx Description

HDG Heading, Deviation &

Variation

HDM Heading, Magnetic

HDT Heading, True

OSD Own Ship Data

THS True Heading & Status

VHW Water Speed and Heading

RMC GNSS Position Data

Figure 37: Supported NMEA 2000 Messages

PGN Description

127250 Vessel Heading

129029 GNSS Position Data

Connect a NMEA Device

Optional

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 45 46

Comentarios a estos manuales

Sin comentarios

AEG KVH 32 Guía de instalación Pagina 23

Comentarios a estos manuales

Relacionado con productos y manuales para Placas AEG KVH 32