AEG HC652601EB Manual de usuario descargar pdf (Pagina 9)

3.5 OptiHeat Control (3 step

Residual heat indicator)

WARNING!

/ / There is a risk of

burns from residual heat.

The indicator shows the level

of the residual heat.

The induction cooking zones make the

heat necessary for cooking process

directly in the bottom of the cookware.

The glass ceramic is heated by the heat

of the cookware.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Activating and

deactivating

Touch for 1 second to activate or

deactivate the hob.

4.2 Automatic Switch Off

The function deactivates the hob

automatically if:

• All roasting zones are deactivated.

• You do not set the temperature after

you activate the hob.

• You spill something or put something

on the control panel for more than 10

seconds, (a pan, a cloth, etc.). An

acoustic signal sounds and the hob

deactivates. Remove the object or

clean the control panel.

• You do not deactivate a roasting zone

or change the temperature. After 90

minutes comes on and the hob

deactivates. Before next use, set the

roasting zone to

.

4.3 The heat setting

To set or change the heat setting:

Touch the control bar at the correct heat

setting or move your finger along the

control bar until you reach the correct

heat setting.

The display flashes until the roasting

zone reaches the temperature. Then a

signal sounds and the display shows the

temperature.

4.4 Timer

Count Down Timer

You can use this function to set how long

the roasting zone should operate for a

single cooking session.

First set the roasting zone then set the

function. The selection of the Timer

function is possible for roasting zones

that are active and after the temperature

is set.

To set the roasting zone: touch

again and again until the indicator of a

necessary roasting zone comes on. When

this function is active,

comes on.

To activate the function: touch of

the timer to set the time (00 - 99

minutes). When the indicator of the

roasting zone starts to flash slowly the

time counts down.

To see the remaining time: set the

roasting zone with . The indicator of

the roasting zone starts to flash quickly.

The display shows the remaining time.

To change the time: set the roasting

zone with . Touch or .

To deactivate the function: set the

roasting zone with

and touch .

ENGLISH

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Comentarios a estos manuales

Sin comentarios