AEG BH8.04 Manual de usuario descargar pdf (Pagina 19)

Building in

Fitting the hob to the worktop

Before fitting the hob into the

cut out, a sealing gasket

supplied with the hob must be

fitted to the edge of the cut

out. It is essential that no gaps

are left in this seal in order to

prevent spillage near the hob

seeping into the cabinet below.

1) Place the sealing

gasket all around the

edge of the cut out.

2) Place the hob into

the cut out and

secure it by means of

the relevant fixing

clamps and screws, as

shown in the diagram.

3) Remove the excess seal

The edge of the hob forms a double seal which prevents the ingress of

liquids.

☞

FO 0199

Seal

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 25 26

Sin comentarios

AEG BH8.04 Manual de usuario Pagina 19