AEG HKP67420FB Manual de usuario Pagina 20

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 28
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 19
Problem Possible cause Remedy
FlexiBridge function oper-
ates. One or more sections
of the function mode which
operates are not covered by
the cookware.
Place the cookware on the
correct number of sections
of the function mode which
operates or change the func-
tion mode.
Refer to "Flexible induction
cooking area" chapter.
PowerSlide function oper-
ates. Two pots are placed on
the flexible induction cook-
ing area.
Use only one pot.
Refer to "Flexible induction
cooking area" chapter.
and a number come on.
There is an error in the hob. Disconnect the hob from the
electrical supply for some
time. Disconnect the fuse
from the electrical system of
the house. Connect it again.
If comes on again, speak
to an Authorised Service
Centre.
comes on.
The electrical connection is
incorrect. The supply voltage
is out of range.
Speak to a qualified electri-
cian to check the installation.
comes on.
There is an error in the hob
because a cookware boiled
dry. Automatic Switch Off
and the overheating protec-
tion for the zones operate.
Deactivate the hob. Remove
the hot cookware. After ap-
proximately 30 seconds, acti-
vate the zone again. If the
cookware was the problem,
the error message goes out.
Residual heat indicator can
stay on. Let the cookware
become sufficiently cool.
Check if your cookware is
compatible with the hob.
Refer to “Hints and tips”
chapter.
comes on.
The cooling fan is blocked. Check if objects block the
cooling fan. If comes on
again, speak to an Author-
ised Service Centre.
comes on.
The electrical connection is
incorrect. The hob is con-
nected only to one phase.
Speak to a qualified electri-
cian to check the installation.
Refer to the connection dia-
gram.
www.aeg.com20
Vista de pagina 19
1 2 ... 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Comentarios a estos manuales

Sin comentarios