
4.7 Automatic Heat Up
If you activate this function you can get a
necessary heat setting in a shorter time.
The function sets the highest heat setting
for some time and then decreases to the
correct heat setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch . Immediately touch the
correct heat setting. A comes on.
To deactivate the function: change the
heat setting.
4.8 Power Boost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical
information” chapter.
To activate the function for a cooking
zone: touch
. P in the ring comes on.
As the zone gets more hot, the colour of
the ring changes.
To deactivate the function: change the
heat setting.
4.9 Power Boost of the double
ring cooking zone
The function is activated for the inner
ring when the hob senses the cookware
with a smaller diameter than the inner
ring. The function is activated for the
outer ring when the hob senses the
cookware with a bigger diameter than
the inner ring.
4.10 Timer
There are 3 functions: Automatic
Counter, Power-off timer and Minute
Minder.
Automatic Counter
You can use this function to monitor how
long the cooking zone operates. The
function starts automatically and comes
on below heat setting in the cooking
zone on the display.
To reset the function: touch to get
the Automatic Counter . Then set the
cooking zone from the list with arrows
and touch to confirm.
Power-off timer
You can use this function to set how long
the cooking zone operates for only this
one time.
To activate the function: touch two
times to get the Power-off timer .
Then set the cooking zone from the list
with arrows and touch to confirm. Set
the time with arrows and touch
to
confirm. When the time comes to an
end, the sound operates and the
cooking zone deactivates.
To stop the sound: touch .
Minute Minder
To activate the function: touch three
times to get the Minute Minder . Set
the time with arrows. The function
indicator comes on. When the time
comes to an end, the sound operates.
To stop the sound: touch .
The function has no effect on
the operation of the cooking
zones.
4.11 STOP+GO
This function sets all cooking zones that
operate to the lowest heat setting.
When the function operates, you cannot
change the heat setting.
The function does not stop the timer
functions.
To activate the function: touch .
comes on.
www.aeg.com
10
Comentarios a estos manuales