AEG 75552G-M Manual de usuario descargar pdf (Pagina 16)



Fitting the Hob into the worktop

Carry out the building in of the hob as follows:

• put the seals

supplied with the hob, on the

edges of the cut out: place

them exactly on the

front edge, at 10 mm from

the rear edge and at 50 mm

from the side edges, as

shown in the diagram,

taking care that the seals

meet without overlapping;

• place the hob in the cut

out, taking care that it is

centred;

• fix the hob with the

relevant fixing clamps and

screws, as shown in the

diagram.

When the screws have been tightened, the excess seal can be removed.

The edge of the hob forms a double seal which prevents the ingress of liquids.

FO 0199

Seal

FO 2753

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

AEG 75552G-M Manual de usuario Pagina 16