AEG 6532K-MN Manual de usuario descargar pdf (Pagina 21)

Operation of the Cooking Surface

Automatic pan and triple ring sensing

Pan and triple ring sensing is automatically activated when the cooking

zone is switched on. Electronic sensors are fitted under the cooking

zones. These sense:

–the material that the pan is made of,

–the size of the base of the pan.

If you select a cooking zone on which there is not a pan, or the pan is

unsuitable,

f appears in the respective "Heat Setting/Residual Heat"

display.

If there is a suitable pan on the selected cooking zone, the second +

third rings on the triple ring zone or casserole zone switch in automat-

ically if required (depending on the size of the pan).

Suitable pans for pan and triple ring sensing:

–All metallic pans with flat bases,

–All pans with a base diameter that is no more than 2 cm smaller

than the cooking zone marked. (Pay particular attention to the diam-

eter of the base when buying pans, most manufacturers give the

diameter of the rim.)

Pans not suitable for pan and triple ring sensing:

–glass, clay and ceramic items,

–pans with uneven bases,

–pans with a base less than 12 cm in diameter.

If you would nevertheless like to use the above mentioned pans, you

can disable automatic pan and triple ring sensing:

Switching off automatic pan and triple ring sensing:

0 1. Select the desired cooking zone using the cooking zone selection but-

tons and set the desired heat setting.

2. Touch the "Triple Ring Zone/Casserole Zone" button, leave you finger on

the button and, within 10 seconds, touch the cooker zone selection

button for the desired cooking zone. An acoustic signal confirms the

entry.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 35 36

Sin comentarios

AEG 6532K-MN Manual de usuario Pagina 21