AEG 64500G-M Instrucciones de operaciones descargar pdf (Pagina 36)

If the battery cubicle is used in connection with the

PROTECT 1.1.50 or PROTECT 1.200, the strain relief is

implemented with clamps.

The battery system can now be activated. To do this, insert

the two fuses



As the last step, fasten each cover that was initially removed.

Fig.: PROTECT 1.BP20 in connection with the PROTECT 1.100

PROTECT 1.100 & 1.BP20: When connecting

the battery connection cable, make sure that the

plugs are inserted quickly and firmly in the

battery connectors.

Prepare further PROTECT 1.BP20 battery cubicles as

described above and then connect them to the terminals



(X2 and X3) of the previously installed battery cubicle with the

enclosed battery connection cables. Observe the correct

polarity "+" and "-" as well as an earth-fault- and short-circuit-

proof routing during connection.

5.6 Mechanical Blocking of PROTECT 1.

After completing the connection work, fasten the connection

terminal cover again. At the final installation site, block the

cubicles against slipping.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 60 61

Sin comentarios

AEG 64500G-M Instrucciones de operaciones Pagina 36