AEG BOGESM Manual de usuario descargar pdf (Pagina 12)

2. Touch or to set an oven

function.

3. Touch or the appliance starts

automatically after five seconds.

If you activate the appliance

and do not set an oven

function or programme, the

appliance deactivates

automatically after 20

seconds.

6.4 Changing the temperature

Touch or to change the

temperature in steps of 5 °C.

When the appliance is at the set

temperature, an acoustic signal sounds

three times and the Heat up indicator

goes out.

6.5 Checking the temperature

You can see the temperature in the

appliance when the function or

programme operates.

1. Touch

.

The Temperature / Time display shows

the temperature in the appliance.

2. Touch

to go back to the set

temperature or the display shows it

automatically after five seconds.

6.6 Fast heat up function

Do not put food in the oven

when the Fast heat up

function operates.

The Fast heat up function is not available

with every oven function. An acoustic

signal sounds if the Fast heat up function

is not available for the set function if

Faulty tone is activated in the "Settings

menu".

The Fast heat up function decreases the

heat up time.

To activate the Fast heat up function

touch and hold for more than three

seconds.

If you activate the Fast heat up function,

the bars on the display flash one by

one and

comes on to show that

the function operates.

6.7 Steam cooking

The water drawer cover is in the control

panel.

WARNING!

Do not put water directly

into the steam generator!

Use only water as the liquid.

Do not use filtered

(demineralised) or distilled

water.

1. Press the cover of the water drawer

to open it.

2. Fill the water drawer with 700 ml of

water.

The water supply is sufficient for

approximately 50 minutes.

3. Push the water drawer to its initial

position.

4. Activate the appliance.

5. Set the steam function (refer to the

"Oven functions" table) and the

temperature.

6. If necessary, touch

to set the

DURATION

or END function

(refer to "Setting the END" or

"Setting the DURATION").

The first steam shows after

approximately 2 minutes. An acoustic

signal sounds when the appliance is at

approximately the set temperature. The

signal sounds again at the end of the

cooking time.

7. Touch to deactivate the acoustic

signal and the appliance.

When the steam generator is

empty, an acoustic signal

sounds.

When the appliance cools down, soak up

all remaining water from the steam

generator with the sponge. If necessary,

clean the steam generator with some

vinegar. Let the appliance dry fully with

the door open.

www.aeg.com

12

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Comentarios a estos manuales

Sin comentarios