AEG AU660 Manual de usuario

ARCTIS U66050iBuilt-in freezerOperating and Installation Instructions

10To fit these brackets remove the two screws at the top left and righthand front corners of the cabinet.Position the two brackets as shown in the fig

11N.B. The joint cover (B) is to beassembled after havinginstalled the appliance in therecess.312B4115°Push the appliance intoplace and retain the cab

12To mount the furniture doorproceed as shown in the fig-ures:☞78abcliccliccCC6ab101234C

Upper part of kitchen furniture panelLower part of kitchen furniture panel9/a275 275 max 10011==109ba==121012345°13

14Refit the covering strip.☞13A12

15Fitting the plinthImportant!For the efficient operation of the appliance, it is important that theoriginal ventilation grid is used.• For an opening

16The mains cable may only be changed by a qualified electrician orcompetent person. If your appliance needs repairing, please contactyour local AEG S

17Description of the applianceView of the appliance➁➂➃➀Freezer calendar➁Control panel➂Drawer (only for storage)➃Drawer (for storing frozen food and fr

Operating and indicator panelImportant! Only use the appliance when built-in!1 Thermostat control knob2 ON/OFF switch3 Pilot light (green)4 Warning li

19– the minimum storage temperature is no longer being maintained (fault);– excessive amounts of fresh food are placed inside; or– if the appliance do

Dear customer,Before placing your new refrigerator/freezer into operation please readthese operating instructions carefully. They contain importantinf

Starting up and temperature regulationTurn the thermostat control knob (1) in the direction of “1”.The green light (3) and the red light (4) come on,

21• Please observe the freezing capacity given on the rating plate. The freezing capacity is the maximum quantity of fresh food that can befrozen with

22Once the required storage temperate has been reached, press the fast freeze button again. The yellow light goes out.Tips:• The following are suited

DefrostingDuring use and when the door is opened, moisture is deposited asfrost inside the appliance, particularly on the evaporator melts. Thisfrost

Switching off the applianceTo switch off the appliance, turn the thermostat control knob to posi-tion "0".If the appliance is not going to b

Switch off the appliance and unplug it.Clean the appliance and the interior accessories with a cloth and lukewarm water. Commercially available dish w

26Energy Saving Tips• Do not install the appliance near boilers, radiators or other sources of heat. High ambient temperatures cause longer, more freq

27SymptomsAppliance does not work,no pilot light isilluminated.Possible CauseAppliance is not switchedon.Mains plug is not pluggedin or is loose.Fuse

28Symptoms Possible Cause RemedyThe compressor starts aftera period of time.This is normal, no error hasoccurred.The compressor does notstart immediat

Service & Spare PartsIn the event of your appliance requiring service, or if you wish to pur-chase spare parts, contact your local AEG Service For

3ContentsImportant Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Disposal. . . . . . . . . . . . . . . . . .

30Noises during OperationThe following noises are characteristic of refrigeration appliances: •Clicks Whenever the compressor switches on or off, a cl

31Technical terminology• Refrigerant• RefrigerantCircuit• Evaporator• Compressor• CondenserLiquids that can be used to a generate a coolingeffect are

AEG Hausgeräte GmbHPostfach 1036D-90327 Nürnberghttp://www.aeg.hausgeraete.de© Copyright by AEG03-03012222 740-24

4Important Safety InstructionsThese warnings are provided in the interests of your safety. Ensureyou fully understand them before installing or using

5• Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or remove spring or bolt catches, if

6DisposalAppliance Packaging InformationAll materials are environmentally friendly. They can be dumped orburned at an incinerating plant without dange

7InstallationInstallation LocationThe appliance should be set up in a well ventilated, dry room.Energy use is affected by the ambient temperature.The

8112345Re-install the grid to the base of the appliance by pushing on to the clasps (a) until they click.☞aaReversing the doorThe side at which the do

93101191213Warning! After completionof the door reversing opera-tion, check that the doorgasket adheres to the cabi-net. If the ambient temper-ature i