AEG KVH 32 Guía de instalación descargar pdf (Pagina 8)

9

Follow the steps below to cut out the switchplate

mounting hole.

a. Using the switchplate mounting template

supplied in Appendix C on page 27, mark

and cut out a hole in the mounting surface to

accommodate the switchplate (see Figure 13).

b. Using the same template, mark the locations

for the four switchplate mounting holes.

c. Drill a 3/32" (2.25 mm) hole at the four

mounting hole locations. Later, you will

mount the switchplate using four #6 screws.

Figure 13: Switchplate Cutout Dimensions

Panel Cutout

0.16"

(4 mm)

3/32"

(2.25 mm) dia

3.82"

(97 mm)

0.32"

(8 mm)

2.05"

(52 mm)

3.19"

(81 mm)

2.36"

(60 mm)

Cut Out the Switchplate Hole

7

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Comentarios a estos manuales

Sin comentarios